SIKA SikaTop Armatec 110 Epocem Kit | WPD Group

Bonding Primer and Reinforcement Corrosion Protection

SikaTop® Armatec®-110 EpoCem® is a cementitious epoxy resin compensated 3-component coating material with corrosion inhibitor, used as bonding primer and reinforcement corrosion protection. SikaTop® Armatec®-110 EpoCem® meets the requirement of EN 1504-7.

  • Contains EpoCem® technology - improved bonding agent
  • Extended open times for repair mortars
  • Compatible with most Sika MonoTop® repair mortars

Usage

  • Suitable for control of anodic areas (Principle 11, method 11.1 EN 1504-9)
  • Suitable in concrete repair as corrosion protection for reinforcement.
  • Suitable as a bonding primer on concrete and mortar
  • Suitable for Increasing cover in Low Cover Concrete rectification

Advantages

  • Contains EpoCem® technology - improved bonding agent
  • Extended open times for repair mortars
  • Compatible with most Sika MonoTop® repair mortars
  • Excellent adhesion to concrete and steel
  • Contains corrosion inhibitor
  • Certified for application under dynamic load conditions
  • Good resistance to water and chloride penetration
  • High shear strength
  • Long pot life
  • Easy to mix
  • Can be brushed on or applied using spray gun
  • 2mm cured material equivalent to approx. 50mm of Concrete

Packaging

8 kg: A (0.457 kg) + B (1.143 kg) + C (6.4 kg)

Colour

Mixed components dark grey

Component A

white liquid

Component B

colourless liquid

Component C

dark grey powder

 

Composition

Portland cement, epoxy resin, selected aggregates and additives

Shelf life

12 months

Storage conditions

Store properly in undamaged original sealed packaging, in dry cool conditions between +5 °C and +25 °C.

Density

A+B+C density: ~2.0 kg/l at 23 °C

Consumption

As reinforcement corrosion protection coating:~ 2 kg per m2 and application layer (~1 mm thick)In total minimum 2 layer thickness (~2 mm thick) As a bonding primer, substrate:> 1.5 to 2.0 kg per m2 /mm dependent on substrate conditions