SIKA Anchor Fix 1 (Box 12) | WPD Group

Sika® AnchorFix 1

High performance, two component adhesive anchoring system.

Solvent- and styrene free based two part polyester anchoring adhesive. The two parts found within the single cartridge are mixed in one action through the static mixing nozzle

Characteristics & Advantages

• Suitable for use with threaded rod, starter bar, hinges and bolts in brick, stone, concrete etc
• Fast curing
• Standard cartridge gun application
• Can be used at low temperatures
• High load capacity
• Non-sag, even overhead
• Styrene-free
• Low odour
• Low wastage
• No transportation restriction
• Supplied with 2 mixing nozzles per cartridge

Where to use

As a fast curing anchoring adhesive for all grades of: Rebars / reinforcing steel - Thread rods - bold and special fastening systems - Concrete - Hollow and solid masonry. Prior to any application, the suitability of the Sika AnchorFix Adhesive for the substrate in terms of the desired bond strength, and for the prevention of surface staining or discolouration, must be confirmed by testing in a sample area. This is due to the wide variation of possible substrates, particularly in terms of strength, composition and porosity: Hard natural stone - Solid Rock

Quantities

• 12 x 300ml Cartridges per Box

Downloads:

Sika AnchorFix 1 PDS

Sika AnchorFix 1 SDS - Part A

Sika AnchorFix 1 SDS - Part B